Fronius DeltaSpot G2, Operating Instructions And Spare Parts List

Page: 22 / 68

22
Lifting point for transport
The welding system can be transported by a forklift truck at the two points in-
dicated by this symbol.
Important! There are four suspension points on the switch cabinet for trans-
port by crane. These may only be used for the switch cabinet – not when the
stationary welding system and the switch cabinet are joined together.
Risk of injury from rotating parts!
Equipment bearing this symbol contains dangerous rotating parts. These can
cause serious injury by pulling in body parts.
-
Avoid contact with these parts.
Risk to persons with pacemakers!
During welding, hazardous electromagnetic fields are generated that could
endanger the lives of persons using cardiac pacemakers.
-
Seek the advice of your doctor before approaching the device or any
welding that is in progress.
- Maintain as large a distance as possible between the power cables and
the head/torso.
Risk due to incorrect operation!
The DeltaSpot welding system may only be operated by one person at a time.
Risk of skin injuries or burns due to weldments!
High levels of residual heat may be generated when welding. Falling compo-
nents can cause severe injuries to feet.
-
Wear appropriate safety boots.
Risk of eye injuries!
-
Wear appropriate safety goggles.
Risk of skin injuries or burns caused by weldments!
Weldments are heated to high temperatures by the welding process. If
touched they can cause burns to hands or other parts of the body.
-
Wear the appropriate protective equipment for welders.
Risk of skin injuries or burns caused by weldments!
Weldments are heated to high temperatures by the welding process. If
touched they can cause burns to hands or other parts of the body.
-
Wear welding gloves when inserting and removing weldments.