4 Assembly
NOTICE
The individual parts of the boiler insulation covered with a protective film. You
must remove the protective film before proceeding with installation.
4.1 Tools required
The following tools are required for assembling the boiler and suction module:
▪ Spanner or box wrench set
▪ Set of Allen keys
▪ Flat head and cross-head screwdrivers
▪ Pipe wrench or water pump pliers (1")
– We recommend the use of a plier wrench for the flat-sealing joints of the PE1
Pellet Unit.
▪ Cordless screwdriver and set of Torx bits (T20, T25, T30)
▪ Power drill with masonry drill bit Ø12 mm
4.2 Transport
The product is delivered on pallet(s) in cardboard packaging.
NOTICE
Possibility of damage to components if handled incorrectly
❒ Follow the transport instructions on the packaging
❒ Transport components with care to avoid damage
❒ Protect components against damp
❒ Pay attention to the pallet's centre of gravity when lifting
Assembly
4
Tools required
Installation Instructions PE1 Pellet 7-35 | M1441017_en
33
