2.1 Core module and connection options
2.1.1 Board view - core module
2.1.3 Connecting the outside temperature
2.1.4 FRA room temperature sensor
2.1.6 Connecting a circulating pump to the core
2.1.7 Connecting an isolating valve to the core
2.1.8 Heating circuit pump 0 / burner relay
Connecting a circulating pump to the hydraulic
Connecting an isolating valve to the hydraulic
2.2.5 Plug power pack Meanwell LRS-100-24
2.3.1 Connecting the bus cable
2.3.3 Setting the module address
2.3.4 Potential equalisation / potential
2.4 Connection information according to
3 Initial start-up with settings wizards
3.1 Before switching on for the first time
3.1.2 Check on the connected units
3.2 General information about the settings
3.3 Switching on for the first time
3.4 Starting the setting wizard
4.1.5 Heating - Heating up program
4.1.6 Heating - General settings
4.4.2 Buffer tank - Temperatures
4.5.5 Boiler - General settings
Boiler - General settings - MODBUS settings
Boiler - General settings - Operator data
Table of contents
2
Froling GesmbH | A-4710 Grieskirchen, Industriestraße 12 | www.froeling.com