![background image](http://html.mh-extra.com/html/fritz-gegauf/bernina-artista-630/bernina-artista-630_service-manual_2338430077.webp)
Service-Manual_artista_630_640_english_V4.01_032069_50_04.doc
77
3c Start/stop unit (SSU) slide control:
What to test:
•
The position of the slide control is displayed on the bar.
Repairing note:
•
If no signal occurs, replace the S-Print.
3d & 3d1 Foot control:
What to test:
•
Activate foot control to display the foot control setting on the bar
display.
•
When using the heel kick function on
the foot control, symbol D 1 lights up.
Repairing note:
•
Check the foot control cable for deformation, loose contacts, tears or breaks. Replace if
necessary.
•
Check foot control ceramic plate and coal carrier functioning. Replace if necessary.
•
Replace
S-Print.
3e Threader sensor:
What to test:
•
As long as the threader is actuated, the bar graph remains active.
Repairing note:
•
Check the sensor cable for deformation, loose contacts, tears or
breaks. Replace if necessary.
•
Replace
threader
sensor