Service-Manual_artista_630_640_english_V4.01_032069_50_04.doc
65
5.29 artista 630 upper thread tension (basic setting)
Standard:
•
Use Mettler white thread (cotton Ne60/2 Nm 43.1/2)
for testing. Thread machine up to and including
thread take-up lever (incl. rear thread guide).
•
Turn adjusting wheel until the red bar mark is in line
with the mark on the housing.
•
Take-up lever must be in a position that it is
farthermost away from the front cover (approx.
needle highest position).
•
Lower presser foot and unwind about 30cm thread
from the spool.
•
The 85g thread tension weight (398 080 040) must
not move.
•
Add 8g (5g + 3g) additional weight. Now the thread
should unwind very slowly.
Correction:
•
Turn adjusting wheel as appropriate.
•
Hold clamp lever (
112
) pressed down (adjusting
wheel is now unlocked).
•
Turn adjusting wheel until the red bar mark is in line with the mark on the
housing.
Be careful ONLY turn the dial
•
Engage clamp lever (
112
) as appropriate.
•
Sewing-off
(
p. 18
).
5.30 artista 640 upper thread tension (basic setting)
Standard:
•
Reset the electronic upper thread tension (
service program 5f and 5i
)
•
Use Mettler white thread (cotton Ne60/2 Nm 43.1/2) for testing. Thread machine up to and including
thread take-up lever.
•
Take-up lever must be in a position that it
is farthermost away from the front cover.
•
Lower presser foot. Pin upper thread
stepping motor (
26
).
•
Unwind about 30cm thread from the spool.
•
Attach upper thread tension weight
(398 080 040) to thread end.
•
The 85g (5g + 3g) weight must not move.
•
Add 8g additional weight. Now the thread
should unwind very slowly.
Correction:
•
Adjust adjusting wheel (
25
) appropriately.
•
Sewing-off
(
p. 18
).
85g thread tension weight (398.080.040)
5g tolerance weight (398 117 030)
3g tolerance weight (398 142 030)
112
25
26
