Service-Manual_artista_630_640_english_V4.01_032069_50_04.doc
60
Correction:
•
Loosen securing screw (
38
) of the clamping piece (
39
).
•
Turn crank (
108
) into pinning position and pin.
•
Pin balance adjustment cam (
107
).
•
Turn toothed segment and gear drive against stop (
A
) and hold firmly while tightening screw (
38
).
•
Use a screwdriver to slightly press crank shaft down at
point (
B
) until toothed segment slides of mesh.
•
At the same time, use a screwdriver to set the toothed
segment parallel at point (
C
) and insert first tooth of
toothed segment into first tooth of the drive gear (
D
).
•
Check basic balance setting.
B
39
38
First tooth toothed
segment parallel
First tooth pinion
A
C
A
D
