– If the combination minutes/seconds is set in setup
mode instead of hours/minutes (see
4.6.2 „Setting time units“ on page 25), the numbers
at h indicate the minutes and at min, the seconds!
The factory setting of the time unit is minutes and
seconds. (Display: 1)
– The remaining running times and the pause times
are displayed during operation.
– Operation with an external time switch is not pos‐
sible.
– For running times see
time (grinding duration)“ on page 33.
– Interrupt grinding by pressing the STOP button.
Continue grinding by pressing the START button.
This takes into account the previous grinding dura‐
tion and the number of repetitions.
6.9 Repetition of grinding / pause cycles
REPETITIONS control panel area
Press + or - button; select the number of repetitions (0..99). The number
of remaining cycles is displayed during operation.
6.10 Reverse mode
®
Press the REVERSE button. The button lights up.
After the selected running time expires, the mill will change its direction
of rotation. For this, REPETITIONS has to indicate at least 1.
"Reverse" is selected when mixing dry samples, for example.
Using the device
- 42 -
