2.5 Device safety information
n
Only use original accessories and original spare parts. Failure to
observe this instruction can compromise the safety of the machine.
n
Safe conduct must be strictly observed during all work.
n
All currently applicable national and international accident preven-
tion guidelines must be complied with.
CAUTION!
Wear hearing protection!
If a noise level of 85 dB(A) is reached or exceeded, ear
protection should be worn to prevent hearing damage.
WARNING!
The maximum accepted concentration (MAC) levels of
the relevant safety guidelines must be observed; if nec-
essary, ventilation must be provided or the machine
must be operated under an extractor hood.
DANGER!
Explosion hazard!
– When Grinding oxidisable substances, e.g. metal or
coal, there is a risk of spontaneous combustion
(dust explosion) if the proportion of fine particles
exceeds a certain percentage. When Grinding these
kinds of substances, special safety measures must
be taken and the work must be supervised by a
specialist.
– The device is not explosion-protected and is not
suitable for Grinding explosive materials.
n
Do not remove the information signs.
NOTICE!
Immediately replace damaged or illegible information
signs.
n
Unauthorised alteration of the device will void Fritsch's declaration
of conformity to European directives and void the guarantee.
n
The PULVERISETTE 5 should only be used when it is in proper
working order, as intended and in a safety- and hazard-conscious
manner adhering to the operating manual. In particular, immediately
rectify any malfunctions that could pose a safety hazard.
n
If, after reading the operating manual, there are still questions or
problems, please do not hesitate to contact our specialised per-
sonnel.
Please observe!
Safety information and use
- 13 -
