NOTICE!
If the minimum filling quantity is fallen short of,
increased wear due to abrasion is to be expected. This
can cause irreparable damage to the mill components.
NOTICE!
The filled in volume can increase during the grinding.
Check the volume after a brief grinding time.
Grinding bowl
Min. sample volumes Max. sample volumes
500 ml
80 ml
225 ml
250 ml
30 ml
125 ml
80 ml
10 ml
30 ml
6.3 Filling the grinding bowl
Do not fail to comply with the following sequence:
1.
Place the grinding balls in the empty bowl.
2.
Fill grinding stock onto the balls.
NOTICE!
Make sure the sealing surface is clean and the
seal is not damaged.
3.
Place the lid on the grinding bowl.
6.4 Factors with an impact on grinding
6.4.1 Running time (grinding duration)
To reduce the grinding time, you can use a grinding bowl and grinding
balls with a higher density, and thus a higher impact energy.
Using the device
- 33 -
