ENGLISH - 38
INSTALLING THE STEEL BEATER OPTIONAL
x
Lubricate the seal gasket and push it into the drive
shaft located on the end of the beater until fully
home.
x
Assemble the scrapers by carefully following the
instructions below:
1. Position the scrapers' hook teeth near the
grooves of the central rings of the beater's body
2. Make sure the scrapers are oriented correctly,
i.e. as in the images to the side.
The correct assembly of scrapers on the beater is
absolutely essential to ensure the machine
operates properly and to prevent malfunctioning
and/or serious breakage.
FRIGOMAT declines all and any liability for damage
caused by failure to comply with these instructions.
-
Place the terminal auger on the beater making sure
that the drive part is placed in its designated seat.
-
Push the beater into the batch freezing cylinder until
fully home. Turn the mixer by hand a few degrees
until it is inserted correctly in the drive support.
Summary of Contents for KISS 3 POWER Series
Page 47: ...ENGLISH 46 ...