ENGLISH - 26
6.5.2 ADJUSTING THE TEXTURE DURING CREATIVE PRODUCTION
If the consistency of the product is not
satisfactory, it is possible to change the value
directly from the push button control panel by
following the instructions below:
-
Make sure the machine is turned on, it
contains enough product and is set for the
CREATIVE FUNCTION.
-
At any time, to enter the mode to adjust the
texture, press and hold the CREATIVE
FUNCTION and SET keys until the display
shows
the
last
set
of
consistency
programmed. The SET LED turns on.
-
The LEDs of the UP (
Ÿ
),Confirm (
ŻŹ
) and
DOWN (
ź
) keys start flashing and the
numbers relative to the consistency setting to
be configured, expressed by a numerical
value between 60 and 250, appear on the
display: press the “UP (
Ÿ
)” and “DOWN (
ź
)”
keys to increase or decrease this value.
Higher consistencies correspond to high
numbers, lower consistencies correspond to
low numbers.
The maximum programmable consistency
value is equal to 250 numbers but not all
mixtures can reach such a high consistency
value.
For mixtures particularly low in sugar and fat,
it is recommended to not select consistency
numbers close to 250.
-
Subsequently, press the CONFIRM (
ŻŹ
)
key to save the new consistency value
programmed.
Summary of Contents for KISS 3 POWER Series
Page 47: ...ENGLISH 46 ...