manualshive.com logo in svg

Freescale Semiconductor e200z3, Reference Manual

The Freescale Semiconductor e200z3 is a powerful product designed for seamless performance. With our comprehensive Reference Manual, users can easily navigate through the device's features and functionalities. Download this manual for free from manualshive.com, enabling you to understand and maximize the potential of this remarkable product.

Share
Download
background image

Debug Support

e200z3 Power Architecture Core Reference Manual, Rev. 2

Freescale Semiconductor

9-33

 

9.7

MMU and Cache Operation during Debug

Normal operation of the MMU may be modified during a debug session using the OnCE OCR. A debug 
session begins when the CPU initially enters debug mode and ends when a OnCE command with Go+Exit 
is executed, releasing the CPU for normal operation. If desired during a debug session, the debug firmware 
may disable the translation process and may substitute default values for the access protection (UX, UR, 
UW, SX, SR, SW) bits, and values obtained from the OnCE control register and page attribute (VLE, W, 
I, M, G, E) bits normally provided by a matching TLB entry. In addition, no address translation is 
performed; instead, a 1:1 mapping of effective-to-real addresses is performed.

When disabled during a debug session, TLB miss or TLB-related DSI conditions cannot occur. If the 
debugger desires to use the normal translation process, the MMU may be left enabled in the OnCE OCR, 
and normal translation (including the possibility of a TLB miss or DSI) remains in effect.

The OCRDMDIS, DW, DI, DM, DG, and DE control bits are used when debug mode is entered. Refer to 
the bit definitions in the OCR (See 

Section 9.5.5.3, “OnCE Control Register (OCR),”

 for more detail). 

These substituted page attribute bits control cache operation on accesses initiated during debug. No 
address translation is performed; instead, a 1:1 mapping between effective and real addresses is performed.

9.8

Enabling, Using, and Exiting External Debug Mode: Example

The following steps show one possible scenario for a debugger wishing to use the external debug facilities. 
This simplified flow shows basic operations and does not cover all potential methods in depth.

Enable external debug mode and initialize debug registers:

1. To enable OnCE operation, the debugger should ensure that the jd_en_once is set.

2. Write a value to OCR in which OCR[DR] and OCR[WKUP] are set. The TAP controller must step 

through the proper states as outlined earlier. This step places the CPU in a debug state where it is 
halted and awaiting single-step commands or a release to normal mode.

3. Scan out the OSR value to determine that the CPU clock is running and the CPU has entered debug 

state. This can be done in conjunction with a CPUSCR read. The OSR is shifted out during the 
Shift-IR state. The CPUSCR is shifted out during the Shift-DR state. The debugger should save the 
scanned-out value of CPUSCR for later restoration.

4. Select the DBCR0 register and update it with DBCR0[EDM] set.

jd_watchpt[5]

DAC2

1

Data address compare 2 watchpoint. Set whenever a DAC2 compare occurs regardless of whether 
DAC2 compares are enabled to set DBSR status.

j

d_watchpt[6] DCNT1 Debug counter 1 watchpoint. Set whenever debug counter 1 decrements to zero regardless of 

whether DCNT1 compares are enabled to set DBSR status.

jd_watchpt[7] DCNT2 Debug counter 2 watchpoint. Set whenever debug counter 2 decrements to zero regardless of 

whether DCNT2 compares are enabled to set DBSR status.

1

If the corresponding event is completely disabled in DBCR0, either load-type or store-type data accesses are allowed to 
generate watchpoints, otherwise watchpoints are generated only for the enabled conditions.

Table 9-12. Watchpoint Output Signal Assignments (continued)

Signal Name

Type

Description

Summary of Contents for e200z3



























































































































































































































































































































































































































































Reviews:

No comments

Related manuals for e200z3

Mackie SP260 Installation Instructions preview
SP260
Brand: Mackie Pages: 2
Mackie SP260 Product Overview preview
SP260
Brand: Mackie Pages: 5
Intel Itanium 9010 Manual preview
Itanium 9010
Brand: Intel Pages: 108
Ruckus Wireless SmartZone 3.6 Command Reference Manual preview
SmartZone 3.6
Brand: Ruckus Wireless Pages: 102
Grizzly PSJ-M3 GEN2 User Manual preview
PSJ-M3 GEN2
Brand: Grizzly Pages: 9
Hama 00039747 Operating Instruction preview
00039747
Brand: Hama Pages: 6
XtendLan NVR-xUD User Manual preview
NVR-xUD
Brand: XtendLan Pages: 228
National Instruments NI-9206 Getting Started preview
NI-9206
Brand: National Instruments Pages: 8
ADTRAN NetVanta Analog Modem Dial Backup Interface Module Quick Start Manual preview
NetVanta Analog Modem Dial Backup Interface Module
Brand: ADTRAN Pages: 2
Stahl HFisolator 9730/26-11 Operating Instructions preview
HFisolator 9730/26-11
Brand: Stahl Pages: 2
National Instruments PCI-6601 User Manual preview
PCI-6601
Brand: National Instruments Pages: 52
Multiplex MULTIflight Stick Operating Instructions Manual preview
MULTIflight Stick
Brand: Multiplex Pages: 10
Cypress Semiconductor CY7C1440AV33 Specification Sheet preview
CY7C1440AV33
Brand: Cypress Semiconductor Pages: 31
B&B Electronics ZXT9-IO-222R2 Product Manual preview
ZXT9-IO-222R2
Brand: B&B Electronics Pages: 74
EDT PCIe Gen1 Framegrabbers User Manual preview
PCIe Gen1 Framegrabbers
Brand: EDT Pages: 43
ebm-papst 8314/2H Operating Manual preview
8314/2H
Brand: ebm-papst Pages: 6
ebm-papst D3G160-BD05-02 Operating Instructions Manual preview
D3G160-BD05-02
Brand: ebm-papst Pages: 12
Muratec OFFICEBRIDGE ONLINE User Manual preview
OFFICEBRIDGE ONLINE
Brand: Muratec Pages: 220

Brands by name

Popular brands

Load more brands