manualshive.com logo in svg

Freescale Semiconductor e200z3, Reference Manual

The Freescale Semiconductor e200z3 is a powerful product designed for seamless performance. With our comprehensive Reference Manual, users can easily navigate through the device's features and functionalities. Download this manual for free from manualshive.com, enabling you to understand and maximize the potential of this remarkable product.

Share
Download
background image

e200z3 Power Architecture Core Reference Manual, Rev. 2

iv

Freescale Semiconductor

Contents

Paragraph
Number

Title

Page

Number

Chapter 2  

Register Model

2.1

PowerPC Book E Registers ............................................................................................. 2-4

2.2

e200z3-Specific Registers................................................................................................ 2-6

2.3

e200z3-Specific Device Control Registers ...................................................................... 2-7

2.4

Processor Control Registers ............................................................................................. 2-7

2.4.1

Machine State Register (MSR) .................................................................................... 2-7

2.4.2

Processor ID Register (PIR) ........................................................................................ 2-9

2.4.3

Processor Version Register (PVR)............................................................................. 2-10

2.4.4

System Version Register (SVR)................................................................................. 2-10

2.5

Registers for Integer Operations .................................................................................... 2-11

2.5.1

General-Purpose Registers (GPRs)............................................................................ 2-11

2.5.2

Integer Exception Register (XER)............................................................................. 2-11

2.6

Registers for Branch Operations.................................................................................... 2-12

2.6.1

Condition Register (CR) ............................................................................................ 2-12

2.6.1.1

CR Setting for Integer Instructions........................................................................ 2-14

2.6.1.2

CR Setting for Store Conditional Instructions ....................................................... 2-14

2.6.1.3

CR Setting for Compare Instructions .................................................................... 2-14

2.6.2

Count Register (CTR)................................................................................................ 2-15

2.6.3

Link Register (LR)..................................................................................................... 2-15

2.7

SPE and SPFP APU Registers ....................................................................................... 2-16

2.7.1

Signal Processing/Embedded Floating-Point Status and Control

Register (SPEFSCR).............................................................................................. 2-16

2.7.2

Accumulator (ACC)................................................................................................... 2-19

2.8

Interrupt Registers.......................................................................................................... 2-19

2.8.1

Interrupt Registers Defined by Book E...................................................................... 2-19

2.8.1.1

Save/Restore Register 0 (SRR0)............................................................................ 2-20

2.8.1.2

Save/Restore Register 1 (SRR1)............................................................................ 2-20

2.8.1.3

Critical Save/Restore Register 0 (CSRR0) ............................................................ 2-20

2.8.1.4

Critical Save/Restore Register 1 (CSRR1) ............................................................ 2-21

2.8.1.5

Data Exception Address Register (DEAR)............................................................ 2-21

2.8.1.6

Interrupt Vector Prefix Register (IVPR) ................................................................ 2-21

2.8.1.7

Interrupt Vector Offset Registers (IVORs) ............................................................ 2-22

2.9

Exception Syndrome Register (ESR) ............................................................................ 2-23

2.9.1

VLE Mode Instruction Syndrome.............................................................................. 2-25

2.9.2

Misaligned Instruction Fetch Syndrome.................................................................... 2-25

2.9.3

Precise External Termination Error Syndrome .......................................................... 2-25

2.9.4

e200z3-Specific Interrupt Registers........................................................................... 2-26

2.9.4.1

Debug Save/Restore Register 0 (DSRR0) ............................................................. 2-26

2.9.4.2

Debug Save/Restore Register 1 (DSRR1) ............................................................. 2-26

Summary of Contents for e200z3



























































































































































































































































































































































































































































Reviews:

No comments

Related manuals for e200z3

Panasonic MICROCOMPUTER MN103S Connection Diagrams preview
MICROCOMPUTER MN103S
Brand: Panasonic Pages: 5
Panasonic MICROCOMPUTER MN103S Application Note preview
MICROCOMPUTER MN103S
Brand: Panasonic Pages: 21
Panasonic FP2 Series Manual preview
FP2 Series
Brand: Panasonic Pages: 56
Panasonic FP2 Series Product Manual preview
FP2 Series
Brand: Panasonic Pages: 28
Panasonic KX-HTS Series Quick Start Manual preview
KX-HTS Series
Brand: Panasonic Pages: 2
Panasonic WJMPU955 - PROCESSING UNIT - TMU Operating Instructions Manual preview
WJMPU955 - PROCESSING UNIT - TMU
Brand: Panasonic Pages: 62
VAF instruments 667 Instructions For Installation, Operation And Maintenance preview
667
Brand: VAF instruments Pages: 56
Blackrock Microsystems Cerebus Instructions For Use Manual preview
Cerebus
Brand: Blackrock Microsystems Pages: 27
Barco ImagePRO-HD Installation Manual preview
ImagePRO-HD
Brand: Barco Pages: 121
IBA ibaFOB-4i-X Manual preview
ibaFOB-4i-X
Brand: IBA Pages: 33
Commell CMB-673 Installation Manual preview
CMB-673
Brand: Commell Pages: 9
Zoom 4412A User Manual preview
4412A
Brand: Zoom Pages: 48
QuickLink QL-CXS Installation Manual preview
QL-CXS
Brand: QuickLink Pages: 8
Uniflair PCOWeb Instruction Manual preview
PCOWeb
Brand: Uniflair Pages: 24
National Instruments SC-2040 User Manual preview
SC-2040
Brand: National Instruments Pages: 56
Supero AOC-1UIPMI-B User Manual preview
AOC-1UIPMI-B
Brand: Supero Pages: 53
Waveshare High-Precision AD/DA Board User Manual preview
High-Precision AD/DA Board
Brand: Waveshare Pages: 8
ETAS ES1337.2 User Manual preview
ES1337.2
Brand: ETAS Pages: 29

Brands by name

Popular brands

Load more brands