MODEL: P LSLW
50
MODEL: P LSLW
50
LOADING TOOL
Do not load the tool with fasteners when
any one of the operating controls is
activated.
Never place a hand or any part of body in
fastener discharge area of tool.
Never point tool at anyone.
●
●
●
The warnings and precautions discussed
above cannot cover all possible
conditions and situations that may occur.
It must be understood by the user that
common sense and caution are factors
which cannot be built into this product,
but must be supplied by the user.
WARNING:
!
UNPACKING
This tool has been shipped completely
assembled.
Make sure that all items listed in the packing
list are included.
Carefully remove the tool and any
accessories from the box.
Inspect the tool carefully to make sure no
breakage or damage occurred during
shipping.
Do not discard the packing material until you
have carefully inspected and satisfactorily
operated the tool.
If any parts are damaged or missing, please
call 1-888-669-5672.
●
●
●
●
●
●
PACKING LIST
2 In 1 flooring nailer
Color box
Mallet
Air connector(Pre-installed)
Adjustment tools
Lubrication oil
Anti-dust cap
5/8" ot plate
Instruction manual
(Pre-installed)
fo
FEATURES
SPECIFICATIONS
Operation pressure:
Nails capacity:
Tool weight:
Air inlet:
Fasteners:
70-115 psi
L: 100 pcs
U 9
9.08 lbs
1/4" NPT
: 0 pcs
FEATURES
REVOLUTIONARY 2 IN 1 DESIGN
NO-MAR DESIGN
ANODIZED ALUMINUM MAGAZINE
DURABLE CONSTRUCTION
AIR FILTER
MALLET INCLUDED
For use with Staples, L-Cleats.
For long lasting durability.
Light weight and durably constructed of high-
strength aluminum and heat treated steel parts.
Keeps interior components debris free,
extending tool life.
Provides increased protection from marring
when working with a finished flooring surface.
●
●
●
●
If any parts are missing do not operate
this tool until the missing parts are
replaced. Failure to do so could result in
possible serious personal injury.
WARNING:
!
Do not attempt to modify this tool or
create accessories not recommended for
use with this tool. Any such alteration or
modification is misuse and could result
in hazardous condition leading to
possible serious personal injury.
WARNING:
!
●
04
05
TOOL USE AND CARE
Know this tool.
Use only fasteners that are recommended
for your models.
Check for misalignment or binding of
moving parts, breakage of parts, and any
other condition that may affect the tool's
operation.
Maintain tools with care.
Store tools out of the reach of children and
other untrained people.
Check operation of the tool before use.
Do not force tool.
Use clamps or another practical way to
secure and support the workpiece to a
stable platform.
Keep the tool and its handle dry, clean and
free from oil and grease.
Do not use the tool as a hammer.
Do not use the tool if it leaks air or does not
function properly.
Read manual carefully, learn
its applications and limitations, as well as the
specific potential hazards related to this tool.
Do not use the wrong
fasteners or load the fasteners incorrectly.
If damaged, have the tool serviced
before using. Many accidents are caused by
poorly maintained tools.
Keep tool clean. A
properly maintained tool, reduces the risk of
binding and is easier to control.
Tools are dangerous
in the hands of untrained users.
Use the correct tool for your
application. The correct tool will do the job better
and safer at the rate for which it is designed.
Holding a tool by hand or
against the body is unstable and may lead to
loss of control.
Always use a clean
cloth when cleaning. Never use brake fluids,
gasoline, petroleum-based products, or any
strong solvents to clean your tool.
Never use this tool in a manner that could
cause a fastener to be directed toward
anything other than the workpiece.
Always carry the tool by the handle. Never
carry the tool by the air hose.
Do not operate the tool if it does not contain
a legible warning label.
TOOL SERVICE
Use only accessories that are identified by
the manufacturer for the specific tool model.
Use of unauthorized parts or failure to
follow maintenance instructions may create
a risk of injury.
Use only the lubricants supplied with the
tool or specified by the manufacturer.
Tool service must be performed only by
qualified repair personnel.
OPERATION
Do not drive fasteners near edge of material.
The workpiece may split causing the fastener or
ricochet, injuring you or people around.
Never engage in horseplay.
Do not drive fasteners on top of other
fasteners or with the tool at an overly steep
angle as this may cause deflection of
fasteners which could cause injury.
Do not actuate the tool unless you intend to
drive a fastener into the workpiece.
Always handle the tool with care:
◆
Respect the tool as a working implement.
◆
◆
Keep others a safe distance from the tool
while tool is in operation as accidental
actuation may occur, possibly causing injury.
AIR SUPPLY AND CONNECTIONS
The connector on the tool must not hold
pressure when air supply is disconnected.
Do not use oxygen, combustible gases or
bottled gasses as a power source for this tool.
Explosion may occur, causing injury or death.
If
an incorrect fitting is used, the tool can remain
charged with air after disconnecting and thus will
be able to drive a fastener even after the air line is
disconnected, possibly causing injury.
Do not connect with an air compressor
which can potentially exceed 200 Psi.
Always disconnect air source:
As tool may burst, possibly causing injury.
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Compatible With Generic Brands Of 15.5Ga
Staples & 16Ga. L-Cleats.
●
Before unloading or making adjustments.
When maintaining the tool.
When clearing a jam.
When touching the safety yoke.
When tool is not in use.
When moving to a different work area.
Such precautionary measures reduce the risk of
injury to persons.
HTTP://WWW FREEMANTOOLS COM 1-888-669-5672
.
.
HTTP://WWW FREEMANTOOLS COM 1-888-669-5672
.
.
●
●
●
●
●
●
●
●
●
(15.5Ga.Staples)
38mm
45mm
50mm
1-1/2"
1-3/4"
2"
38mm
45mm
50mm
1-1/2"
1-3/4"
2"
(16Ga.L cleats)
12.7mm (1/2")
7.5mm (3/10")
