freeStor Xpand 1500C User’s Manual
27
not support command tag queuing.
Max Sync Rate:
The RAID subsystem supports 320 MB/sec as the highest data transfer
rate.
Figure 3-13: Volume Creation Page
8. When prompted with the “Fast Initialization” prompt (Figure 3-14), select “Yes” to use Fast
Initialization. To use Normal initialization, select “No”. Normal Initialization takes longer, but
operates in the background so you can use the newly created volume immediately. For Fast
Initialization, the initialization must be completed before the volume set is ready to use.
Figure 3-14: Fast Initialization Prompt
9. Repeat steps 2 to 5 to create additional volume sets.
10. The initialization percentage of the volume set will be displayed at the button line.
3.6.2 Delete Volume Set
To delete a Volume Set from a RAID set, select “Delete Volume Set” under “Volume Set
Function”. All of the RAID Sets will be displayed. Select the desired RAID Set, then press
<Enter>. In the RAID Set, select the desired Volume Set to delete and press <Enter>. Confirm
