PRE-INSTALLATION CHECKLIST
La Marzocco Linea 3-Group Espresso Machine (3AV, 3EE)
***See also: Installation Guidelines diagram***
LOCATION:
INSTALLER / PHONE NUMBER:
The following onsite requirements must be ready prior to the arrival of the equipment installer.
Please check each box and obtain the store manager’s signature verifying that all requirements
have been met.
*The installer will be notified of a tentative date for this upcoming installation.
*
Franke Coffee Systems is not financially responsible for trips to sites that do not meet pre-installation re-
quirements.
Electrical Requirements
□
208–240 volt, 50/60 hz, single phase power on its own 50 amp circuit breaker
□
An L6-50R amp receptacle within 3’ of the machine’s installation location with matching plug
(L6-50P) as one is not supplied with the machine
□
Power is operational
Plumbing Requirements
□
3/8” cold water supply with shutoff valve within 5’ of machine’s installation location
□
Water supply is operational
□
Floor drain in place within 5’ of machine
A 5/8” flexi drain line is included with the machine
□
Appropriate water filtration connected and active –
*
Water must be softened to a maximum 3 - 5 grain hardness level
Height, Width, and Depth Requirements
□
Machine is 37”W x 20.5”H x 21”D
□
Minimum 5” of clearance above the grinders
Countertop Requirements
□
2 ½” diameter hole for utility lines drilled into countertop beneath machine’s installation loca-
tion
Additional Requirements
□
Coffee and milk onsite
Store Manager’s Signature:
Date:
Print Name:
***If machine is shipped to store, DO NOT UNPACK***
Machine should only be unpacked by installer at time of installation, as many small parts are included
inside box
