13. When the shaft is dissas-
sembled, you should have
2 o-rings, 1 bushing, and 1
spring.
14. Remove the shaft end
gasket by prying an awl or
gasket pick into the gas-
ket....
15. Then carefully pry out
the old gasket.
16. Install a new shaft-end
gasket by tucking in one
edge of the gasket with a
small screwdriver.
17. When the gasket has
been partially inserted with
the screwdriver, press the
gasket against a firm surface
and roll it into postition.
18. Reinstall the spring and
bushing. Ensure the bushings
larger diameter surface faces
the spring.
19. Install two new shaft
o-rings and apply a film of
food-grade lubricant.
20. Reinstall the steam
shaft into the valve body.
21. Reinstall the shaft
assembly onto the valve
body.
22 Replace the steam
arm o-rings and apply a
film of food-grade lube.
23. Replace the swivel
wand o-rings (if so
equipped). Apply a film of
food-grade lube.
24. Install the steam wand
onto the steam valve
spring
gasket
o-rings
