![background image](http://html1.mh-extra.com/html/franke/ad72m/ad72m_instructions-for-use-and-installation_2327479019.webp)
18
Then, with the buttons
and
, set the required time
On releasing the button, the countdown begins and the current time is displayed.
When the time is up an acoustic signal sounds, which can be turned off by pressing any button (except buttons
and
)
and the symbol
goes off.
Modifying and deleting data
• The data entered can be changed at any time by pressing the corresponding button and the button
or
.
• Cancelling the cooking duration automatically ends the function, and vice versa.
• If the oven has been programmed, it will not accept end of cooking times prior to those of start of cooking proposed
by the appliance itself.
NB: The oven stays hot at around the set cooking temperature for a long time after it has been switched off; therefore,
to avoid overcooking or burning the food it is advisable to remove it from the oven.
End of cooking clock
The figure shows the programmer controls; knobs 1 (LH) and 2 (RH) enable all the
necessary settings.
Knob 1
Used to set the current time. Pull out the knob and turn it clockwise until reaching
the current time.
Knob 2
Used to set the cooking duration or to arrange the oven for manual use. To do this,
turn the knob clockwise.
Manual oven operation
The oven can be used normally, i.e. without any programming. In this case, turn
knob 2 of the programmer clockwise until the symbol
coincides with the fixed
indicator
on the front panel.
Semiautomatic oven operation
Normal start of cooking with programmed end of cooking:
arrange the food to be cooked; turn knob 2 clockwise and set the minutes for the end of cooking on the dial (Q); turn
the programme selector knob to the setting and the thermostat knob to the required temperature. The oven starts
immediately.
At the end of the set time the acoustic signal sounds and the oven is automatically turned off. To silence the acoustic
signal, turn the clock to “0” or manual mode by operating knob 2.
NB: The oven stays hot at around the set cooking temperature for a long time after it has been switched off; Therefore,
to avoid overcooking or burning the food it is advisable to remove it from the oven.
Timer
The clock can be used as a timer only if the oven is not working.
For timer operation, turn knob 2 clockwise to set the required time on the dial (Q). The maximum settable time is 180
minutes. To silence the acoustic signal, turn knob 2 clockwise until the symbol “0” coincides with the fixed indicator
on the front panel.
Important
To use the oven in manual mode (i.e. without programming):
• Turn knob 2 of the programmer clockwise until the symbol
coincides with the fixed indicator
on the front
panel.
Summary of Contents for AD72M
