FPI P36D-1 Zero Clearance Direct Vent Gas Fireplace
58
HAMPTON
®
OPTIONS
HAMPTON
®
CAST FACEPLATE
1)
Remove top louver and grill.
2)
Open bottom louver and grill.
3)
Install the left side faceplate by pushing in at the side of the fi rebox
and line up with top and bottom holes on side. Secure with screws,
tighten loosely.
Secure top of
faceplate with screw.
4)
Repeat step 3 for the right side faceplate.
Secure bottom of
faceplate with screw.
5)
Slide top piece of faceplate into side faceplates by fi tting mounting
plates into brackets.
6)
Push in both side faceplate pieces and completely tighten screws.
7)
Re-install top louver and grill.
8)
Close bottom louver and grill.
Side piece
Faceplate
(Back View)
Bracket on back of
side faceplate.
Top piece
Faceplate
NOTE: Do not push in side faceplates all the
way, allow for room to place the top faceplate.
Mounting
Plate
Summary of Contents for Regency P36D-LP1
Page 7: ...FPI P36D 1 Zero Clearance Direct Vent Gas Fireplace 7 INSTALLATION UNIT DIMENSIONS...
Page 50: ...FPI P36D 1 Zero Clearance Direct Vent Gas Fireplace 50 FLUSH BAY DOOR OPTIONS...
Page 57: ...FPI P36D 1 Zero Clearance Direct Vent Gas Fireplace 57 CAST FACEPLATE...
Page 66: ...FPI P36D 1 Zero Clearance Direct Vent Gas Fireplace 66 REPLACEMENT PARTS LIST...
