FPI P36D-1 Zero Clearance Direct Vent Gas Fireplace
56
REGENCY
®
OPTIONS
Note:
The Nailing Strips can be adjusted, depending on the facing
material (as indicated in Diagram 7).
9)
Optional
Install Optional Tripoli 3-Panel Arch Screen Door. (Refer to 3-Panel
Arch Door Instruction Sheet).
8)
Attach Top and Side Support Frame
a) Ensure the Side Supports are aligned with the corresponding
hole on the Top Support Frame, then secure with 1 screw.
b) Repeat step on the other side.
10)
Change Logo
Replace existing logo with Regency logo.
a) Mount Side Support Frame to unit as shown in Diagram 6, then
secure with 2 screws on each side.
7)
Side Support Frame
b) Repeat step on the other side.
6)
Install Top Support Frame
Slide in the Top Support Frame using the slots as a guide. Secure
and re-tighten the screws to the unit.
View of backside of Top Support Frame.
Cut-Outs
Diagram 7
1/2” Facing
Material
1” Facing
Material
Diagram 6
Summary of Contents for Regency P36D-LP1
Page 7: ...FPI P36D 1 Zero Clearance Direct Vent Gas Fireplace 7 INSTALLATION UNIT DIMENSIONS...
Page 50: ...FPI P36D 1 Zero Clearance Direct Vent Gas Fireplace 50 FLUSH BAY DOOR OPTIONS...
Page 57: ...FPI P36D 1 Zero Clearance Direct Vent Gas Fireplace 57 CAST FACEPLATE...
Page 66: ...FPI P36D 1 Zero Clearance Direct Vent Gas Fireplace 66 REPLACEMENT PARTS LIST...
