fos4X Blackbird OECD MDE0835 Instructions For Use Manual Download Page 71

Page: 71 / 80

9. Maintenance

Doing a firmware update via the web interface:

Open the web-interface. See

Opening the Web Interface., page 57

Open the page SETTINGS.

Open the page FIRMWARE UPDATE.

Click on SELECT FILE.

Select the firmware archive.

Click on OPEN.

The firmware archive is displayed in the

Firmware image:

field.

Click on UPLOAD FIRMWARE.

The status is displayed at

Status:

Wait until the firmware update is complete.

Reboot the Blackbird OECD. Turn the power supply off and on.

Firmware update complete.

9.2.4.2

Firmware Update via fos4X Firmware Flasher

Table 52: Material and equipment

Name

Type

Quantity

GTIN

Ethernet connector
(RJ45)

Ethernet cable

RJ45

Software

fos4X Firmware Flasher
(f3.exe)

Conditions:

■

Firmware archive for the Blackbird OECD available.

■

IPv6 protocol enabled on the PC.

Doing a firmware update via fos4X Firmware Flasher:

Stop the normal operation of the Blackbird OECD.

If necessary: Remove the cable from the ETH connector.

MDE0835_4-10_1.3.x_5.0_Blackbird

OECD_(6CH, CNO)-en-us

71 / 80

Summary of Contents for Blackbird OECD MDE0835

















































































Search results

Summary of Contents for Blackbird OECD MDE0835

Reviews:

Related manuals for Blackbird OECD MDE0835

Brands by name

Popular brands

fos4X Blackbird OECD MDE0835, Instructions For Use Manual

Search results

Summary of Contents for Blackbird OECD MDE0835

Reviews:

Related manuals for Blackbird OECD MDE0835

Brands by name

Popular brands