Running the automatic feeder
75
You change the total feeding duration as follows:
1. Choose
> Feeding
to go to the
Animal
submenu.
2. Choose
to select the desired animal number.
3. In
Plan day
, you can check which day the calf is on in the feeding plan.
4. Confirm
Plan day
by choosing
.
5. In
Feed. day
, you can check the number of days that have passed since the calf was reg-
istered.
6. In
Correction
, you enter the number of days by which you want to reduce or extend the
feeding duration according to the group feeding plan for the calf. The maximum possible
extension corresponds to the number of feeding days.
Note:
To extend the feeding duration, use the (
+/-
) key to enter a negative number such as
-2. To shorten the feeding duration, use the (
+/-
) key to enter a positive number such as +2.
7. In
Plan day
, you can check the new plan day of the calf.
8. In
Plan end
, you can view the number of days after which the feeding plan will end.
9. In
Feed
, you can check the feed quantity that the calf will receive on the current day (today).
10.In
Conc.
, you can view the feed concentration that the calf will receive on the current day
(today).
6.5.6
Feeding plans
The following plans are taken into account when the feed is prepared:
Summary of Contents for TAP5-CH2-25
