104
Failures and warnings
An interruption in feeder operation means that your calves will not receive any
feed. This can lead to malnutrition. Malnutrition can cause impaired growth and development,
increased susceptibility to illness or even the death of your calves. You must use an alternative
method to supply your calves with feed as long as feeder operation is interrupted.
If this failure message appears, you must contact your service technician immediately.
7.1.2
Heating
failure heating xx.x °C
is shown in your display when the temperature of the boiler water is
too low. Feeder operation is interrupted.
An interruption in feeder operation means that your calves will not receive any
feed. This can lead to malnutrition. Malnutrition can cause impaired growth and development,
increased susceptibility to illness or even the death of your calves. You must use an alternative
method to supply your calves with feed as long as the automatic feeder is out of service.
You eliminate the failure as follows:
1. Check whether your calves are consuming feed so quickly that the boiler does not have
enough time to heat up the water.
2. Check the temperature of the portion and, if necessary, reduce it via
> Device data >
Portion
.
If the failure appears again, you must contact a service technician immediately.
7.1.3
Temperature too high
Failure, temperature too high
appears in your display when the water temperature in the
boiler is too high. Feeder operation is interrupted until the water in the boiler has cooled to the
set maximum temperature. Provide your calves with feed using an alternative method as long
as feed operation is interrupted.
An interruption in feeder operation means that your calves will not receive any
feed. This can lead to malnutrition. Malnutrition can cause impaired growth and development,
increased susceptibility to illness or even the death of your calves. You must use an alternative
method to supply your calves with feed as long as the automatic feeder is out of service.
You eliminate the failure as follows:
1. Confirm
Failure, temperature too high
by choosing
.
Summary of Contents for TAP5-CH2-25
