Förster-Technik TAP5-CH2-25, Original Operating Instructions

Page: 111 / 131

Failures and warnings 111
You eliminate the failure as follows:
1. Confirm Unknown transmitters warning by choosing .
2. In No. , you check the unknown transmitter number.
3. In Number , you check how many times the unknown transmitter number was identified.
4. In Time , you check when the transmitter was last registered by the identification system.
5. Confirm delete? by choosing if you want to delete the transmitter number.
6. Confirm Register by choosing if you want to allocate the unknown transmitter number
to an animal number.
7.2.5 Calibration
The calibration warning appears in your display if the last calibration was 120 days ago. You
can see which components you have to calibrate.
You eliminate the failure as follows
1. Calibrate all components shown in the display as described in chapter 6.7.2.1 Manually re-
calibrating liquid and powder components, page 98 .
2. Confirm delete warning? by choosing .
Note: If you delete the warning without calibrating, the message will appear again the next
day.
7.2.6 Calibration scale
The calibration scale warning appears in your display if your calibration scale is not working.
You must contact a service technician immediately.
Risk of malnutrition caused by incorrectly dispensed feed portions. Malnutrition
can cause impaired growth and development, increased susceptibility to illness or even the
death of your calves. You must ensure that you provide your calves with feed using an alter-
native method as long as the calibration scale is not working.
7.2.7 Double animal number
Warning, Double animal no. appears in your display if the same number was assigned twice
during the fully automated registration process.