Förster-Technik TAP5-CH2-25 Original Operating Instructions Download Page 112

Page: 112 / 131

112

Failures and warnings

You change the double animal number as follows:

1. Confirm

Double animal no. warning

by choosing

The

Double

menu in Animal control appears (see chapter

6.6.8

Double, page

)

2. In

No.

, you can view the full unknown transmitter number of the duplicate calf.

3. In

Animal no.

, change the automatically assigned number.

4. In

Time

and

Date

, check when the double animal number appeared.

5. Once you have changed the animal number, confirm

confirm?

by choosing

Note:

Your confirmation is not effective and the warning is not deleted until you have deleted

the animal number.

7.2.8

Machine capacity

Warning, Machine capacity

appears when there is no more storage space available for ani-

mal numbers or transmitter numbers.

Confirm

Machine capacity

by choosing

in order to view detailed information.

•

only 50 animals poss.

means: No more free animal numbers are available.

•

Transmitter storage full

means: No more storage space available for further transmitter

numbers.

You rectify the error as follows:

1. Choose

> Animal management > Transmitters

to go to the

Edit

submenu.

2. Select the transmitter number to be deleted and confirm

Delete

by choosing

Note:

You can only delete transmitter numbers from calves that are not registered (= status:

available).

3. Confirm

delete warning?

by choosing

7.2.9

Database

The

Database warning

appears in your display if there are errors in your database. You must

contact a service technician immediately.

7.2.10 Checking the SD card (15-key hand terminal only)

The

Check SD card

warning appears in your display:

Summary of Contents for TAP5-CH2-25




































































































































Search results

Summary of Contents for TAP5-CH2-25

Reviews:

Related manuals for TAP5-CH2-25

Brands by name

Popular brands

Förster-Technik TAP5-CH2-25, Original Operating Instructions

Search results

Summary of Contents for TAP5-CH2-25

Reviews:

Related manuals for TAP5-CH2-25

Brands by name

Popular brands