Förster-Technik TAP5-CH2-25 Original Operating Instructions Download Page 14

Page: 14 / 131

Introduction

1.3.7

Number of feeding stations and animals

Your automatic feeder has 2 feeding stations. You can feed up to 50 calves, with 30 calves per

feeding station.

1.4

Symbols and abbreviations

1.4.1

Symbols

You can find a list of the symbols and abbreviations as used in this operating manual in the

following.

The places in the text marked with this symbol only apply to the automatic feeder

Compact.

The places in the text marked with this symbol only apply for the automatic feeder

Option: A white plus sign on a black background indicates that optional functions

or equipment are being described.

1.4.2

Abbreviations

Abbreviation

Meaning

abs.

Absolute

Ad lib

save amt.

Amount saved up

feed.pump

Feeding pump

out. pause

Output pause

sw.off del.

Switch-off delay

dr. time

Drink-out time

Boiler

dos.

Dosage

Electrode

electrol.

Electrolyte

sw. on del.

Switch-on delay

gradient

Gradient control

gr. A (B)

Group A (B)

IFS TR

Intelligent feeding station feed

IFS KF

Intelligent feeding station concentrate

Interval feeding program

Concentrate

conc./concentr.

Concentration

dra.v. teat

Drain via teat

w. entitle.

With entitlement

w/add. or w/addiv.

With additive

Summary of Contents for TAP5-CH2-25




































































































































Search results

Summary of Contents for TAP5-CH2-25

Reviews:

Related manuals for TAP5-CH2-25

Brands by name

Popular brands

Förster-Technik TAP5-CH2-25, Original Operating Instructions

Search results

Summary of Contents for TAP5-CH2-25

Reviews:

Related manuals for TAP5-CH2-25

Brands by name

Popular brands