Förster-Technik TAP5-CH2-25 Original Operating Instructions Download Page 69

Page: 69 / 131

Running the automatic feeder

10.Only add milk powder (MP) to the powder container if you want to restart the automatic

feeder immediately.

11.Insert the mains plug and turn on the automatic feeder again using the control switch .

12.Enable milk powder dosing in order to fill the dosing star and the dosing unit.

12.1 Go to

> Diagnosis

to go to the

Powder motor

submenu and press

to start

the motor.

13. Calibrate the milk powder (MP) (see chapter

6.7.2.1

Manually recalibrating liquid and pow-

der components, page

The automatic feeder is now ready for operation again.

6.5

Feeding

You may only use the automatic feeder to prepare liquid feed for your calves.

Note:

If you have installed additional peripheral devices such as the additive dispenser, you

must also follow the instructions in the operating manual for these devices.

6.5.1

Replenishing feed

To ensure that the automatic feeder can prepare feed, you must make sure that the powder

container are alwaysfilled.

6.5.1.1 Filling the milk powder container

Only add milk powder (MP) that is suitable for calf feeding.

Make sure that no paper or other foreign objects enter the powder container. The

dosing mechanism could otherwise be damaged or the dosage accuracy impaired. As a result,

your calves could receive insufficient concentration of feed and would not be supplied with any

or enough food. This can lead to malnutrition, which can cause impaired growth or develop-

ment, increased susceptibility to illness or even the death of your calves.

If the powder hopper is empty, no warning is displayed. Feeder operation is con-

tinued without a milk substitute. This can result in your calves only receiving water. This can

lead to malnutrition, which can cause impaired growth and development, increased suscepti-

bility to illness or even the death of your calves.

Summary of Contents for TAP5-CH2-25




































































































































Search results

Summary of Contents for TAP5-CH2-25

Reviews:

Related manuals for TAP5-CH2-25

Brands by name

Popular brands

Förster-Technik TAP5-CH2-25, Original Operating Instructions

Search results

Summary of Contents for TAP5-CH2-25

Reviews:

Related manuals for TAP5-CH2-25

Brands by name

Popular brands