42
3. Apply a small amount of clean isopropyl alcohol to a PEC*PAD.
4. Wipe the flexible film exterior to remove contamination or resin.
To clean the tank frame:
1. Put on a new, clean pair of nitrile gloves.
2. Wipe the tank frame with a low-fiber paper towel to remove contamination or resin.
6.7.3
Replacing the resin tank
Replace the resin tank to change materials between prints or when a resin tank is damaged
or needs to be cleaned.
To replace the resin tank:
1. Put on a new, clean pair of nitrile gloves.
2. Remove the build platform from the printer.
3. Hold the side walls of the resin tank.
4. Gently slide the resin tank away from and out of the printer.
5. Store the resin tank in the tank case with the lid closed.
6. To install a new resin tank, refer to section
4.8 Inserting the resin tank and mixer
.
To dispose of the old resin tank, refer to section
9.1 Disposal of resin and accessories
.