26
3. Insert the cardboard X-stage brace into the printer cavity. Press the brace against the rear
wall of the printer cavity, beneath the X-axis linear rail.
4. Close the printer cover.
5. Slide the printer sleeve over the printer.
6. Tilt one side of the printer up and slide a lifting strap underneath. Repeat with a second
sling under the other side of the printer.
7. Place the foam carrier tray insert into the cardboard carrier tray.
8. Use the provided handles on the lifting straps to lift the printer into its carrier tray.
Lifting hazard: The Form 3BL is a heavy object. A two person lift is required to
prevent injury and avoid damage to the machine.
9. Place the two foam inserts on the top edges of the printer.
10. Lower the outer box onto the printer.
11. Seal each edge of the opening with adhesive packing tape.
CAUTION