Maintenance |
33
•
Non-abrasive microfiber cloth
For cleaning the printer’s cover, outer shells, and display.
•
PEC*PADs
For cleaning the printer’s optical components and cartridge ID chips.
•
Rubber bulb air blower
For removing dust from the glass optical window.
•
Tank tool
For inspecting and cleaning the flexible film interior.
6.2
Inspecting and maintaining the printer
Inspect and maintain your printer and consumables to ensure that your printer continues to
function properly and produce high print quality. For detailed guidance and visual assistance,
visit
support.formlabs.com
.
6.2.1
Before each use
Inspect
Refer to
Section
Installation environment
Operational environment
4.1
Build platform
Cleaning the build platform
6.3.1
Resin cartridge bite valves
Inspecting the bite valves
6.3.2
Resin tank interior
Inspecting the resin tank
6.7.1
6.2.2
Monthly maintenance
Inspect
Refer to
Section
Resin cartridge ID chips
Inspecting the cartridge ID chips 6.4.1
Resin tank exterior
Inspecting the resin tank
6.7.1
Resin tank frame
Inspecting the resin tank
6.7.1
6.2.3
Periodic maintenance
Inspect
Refer to
Section
Cover
Inspecting the cover
6.5.1
Display
Inspecting the display
6.5.2
Drip catcher
Inspecting the drip catcher
6.5.3
Shells
Inspecting the shells
6.5.4
X- and Z-axis screws
Maintaining the X- and Z-axis screws
6.5.5
6.3
Tasks between uses
Perform the following maintenance tasks between each print. For detailed guidance and visual
assistance, visit
support.formlabs.com
.
Skin irritant: Resin and solvent may cause skin irritation or an allergic skin reaction. Wear
gloves when handling liquid resin, resin-coated surfaces, or solvent. Wash skin with plenty
of soap and water.