24
5. Place the resin cartridge into the slot. The resin cartridge fits into the slot in one orientation.
A sensor detects the resin cartridge, and the status lights pulse.
6. Press the vent cap open, so that the resin tank fills correctly.
7. Place a second resin cartridge, with the same resin type and version, into the other slot.
4.11
Installing the Form 3BL Finish Kit
The Form 3BL comes with a finishing kit that includes a variety of post-processing tools. After
printing, use the tools to remove prints from the build platform, wash prints in solvent, and remove
supports.
4.11.1
Installing the rinse bucket
Connect the rinse bucket ground wire to a grounded piece of metal. If you store
solvent in a metal container, electrically connect it to the grounded rinse bucket.
To fill the rinse bucket with solvent:
1. Place the pump intake into the solvent container.
2. Securely place the flexible pump hose into the rinse bucket.
3. Press and hold the pump switch to pump solvent into the rinse bucket.
Ensure that you have sufficient solvent (isopropyl alcohol or tripropylene glycol monomethyl ether)
to wash your prints. For more information about solvent handling, visit
support.formlabs.com
.
4.11.2
Installing the build platform jig
NOTICE