Introduction |
7
2.2
Technical specifications
Parameter
Unit
Printer
Form 3BL
3D printing technology
Low Force Stereolithography (LFS)™
Minimum dimensions for convenient
access (W × D × H)
90 × 96 × 104 cm | 35.4 × 37.8 × 41 in
Printer dimensions (W × D × H)
77 × 52 × 74 cm | 30.3 × 20.5 × 29.1 in
Printer weight
54.4 kg | 120 lb
Build volume (W × D × H)
33.5 × 20 × 30 cm | 13.2 × 7.9 × 11.8 in
Layer thickness (Axis resolution)
25–300 microns | 0.001–0.012 in
XY resolution
25 microns | 0.001 in
Laser spot size (FWHM)
85 microns | 0.0033 in
Resin cartridges
2
Resin dispensing system
Automated
Biocompatible materials
No
Supports
Auto-generated, Light-touch removal
Operating environment
18–28 °C | 64–82 °F
Low ambient humidity
Operating temperature
Auto-heats to 35 °C | 95 °F
Temperature control
Air heated print chamber
Power requirements
100–240 VACMaximum 8.5 A
50/60 Hz
650 W
Laser specifications
IEC 60825-1:2014 | EN 60825-1:2014
Class 1 laser product
2 Light Processing Units (LPUs)
In each Light Processing Unit (LPU):
405 nm violet laser | Maximum 250 mW
Radiation information
The Form 3BL is a Class 1 laser product. Accessible radiation
is within Class 1 limits.
Connectivity
Wi-Fi:
2.4, 5 GHz
Ethernet:
1000 Mbit
USB:
2.0
Wi-Fi connectivity
Protocol:
IEEE 802.11 b/g/n
Frequency:
2.4 GHz, 5 GHz
Supported security:
WPA/WPA2
Ethernet connectivity
RJ-45 Ethernet (10BASE-T/100BASE-TX/1000BASE-T) LAN Port
Connect with a shielded Ethernet cable (not included):
minimum Cat5, or Cat5e or Cat6 for 1000BASE-T.
USB connectivity
USB (rev 2.0) B port with a USB A-B cable
Sound emission
Does not exceed 70 dB(A).
Printer control
Interactive touchscreen
Alerts
Touchscreen alerts, SMS/email via Dashboard,Two LED status
indicators, Speaker for audio alerts
Print preparation
PreForm desktop software
File type
STL or OBJ