1.3.9 Restraints System
WARNINGS:
Modifications to the restraints system
are not allowed.
Airbag are explosive. For safe removal
and storage during conversion follow the
procedures in the Ford workshop manual
or consult your local National Sales
Company representative.
Do not alter, modify or relocate the airbag,
sensor and modules of the restraints
system or any of its components.
Attachments or modifications to the front
end or B-Pillar of the vehicle may affect
the airbag deployment timing and result
in uncontrolled deployment.
For additional information:
Refer to: 5.11 Airbag Supplemental Restraint
1.3.10 Drilling and Welding
WARNING: Do not Drill or Weld Boron
steel parts, see figure E167660 in the
welding section of this manual.
Drilling and welding of frames and body structure
have to be conducted following the guidelines in
Welding and Frame Drilling and Tube Reinforcing
sections.
Refer to: 5.15 Frame and Body Mounting (page 281).
1.3.11 Minimum Requirements for
Brake System
It is not recommended to modify the brake system.
If a special conversion should require
modifications:
•
Maintain original settings.
•
Maintain brake certification load distribution.
Changes to the Anti-lock Brake System (ABS),
Traction Control System (TCS) and Electronic
Stability Control ESC (also known as ESP) system
are not permitted.
1.3.12 Road Safety
The respective instructions should be strictly
observed to maintain operational and road safety
of the vehicle.
FORD
TRANSIT
2016.75
Date of Publication: 03/2018
EU
1 G
ener
al Inf
orma
tion
10
