•
Ensure sealing of surfaces, for example: with
EPDM rubber material or equivalent and ensure
sealing along the bolt for preventing water
ingress into the interior of the vehicle, see figure
E176163 items 3 and 5.
•
The thread size is M8. The maximum intrusion
of the M8 bolt into the roof is 16mm, see 'A' in
figure E176163.
•
Read and follow the manufacturer's
instructions when fitting a roof rack.
•
It is recommended that the rack leading edge
should not be located forward of the rear edge
of the driver’s door, or “B” pillar.
•
When removing the roof rack ensure holes are
properly sealed with sealing plugs or equivalent
water tight elements.
Date of Publication: 03/2018
FORD
TRANSIT
2016.75
5 Body and P
aint
279
EU
