4.19.5 Vehicle Interface Connector
E226735
5
8
6
7
1
4
2
3
Description
Item
Ground
1
Engine Run
2
SRC Inhibit (Start Stop disabled)
3
Not used
4
Vehicle Speed
5
Ignition
6
IP Switch Illumination
7
Ford Programmable Battery Guard
8
The Vehicle Interface Connector provides a direct
interface to signals. See figure E226735 for location
WARNINGS:
Signals 3, 5 and 7 on the Vehicle Interface
Connector are for sensing purposes only
and not to be loaded by high current
consumers. The max current rating for
signal 6 is 10A and not to be exceeded in
any situation, this includes the total of
the Ford System and Third Party System
requirements.
Unused wires in the service kit must have
cable ends insulated to avoid shorting on
any ground points.
A service kit (KTGK2V-14A411-C*) can be ordered
from your local Ford Dealer, the kit contains the
mating connector (4S7T-14489-VH*) to access
these signals, and 3m of wiring.
When the Auxiliary Fuse Panel is fitted to the
vehicle, the Interface Connector is occupied by the
attached wiring harness. In this case these signals
and some additional features are available through
the C1 connector. For more details refer to Auxiliary
Fuse Panel section.
FORD
TRANSIT
2016.75
Date of Publication: 03/2018
EU
4 El
ec
tric
al
196
