The standard system includes the Auxiliary Fuse
Panel and a Supplementary Fuse Box, it is
powered by two fuses from the Customer
Connection Points at the driver's seat pedestal.
The Ford production fit location of these feeds
are under the carpet at the rear of the drivers seat
pedestal, see figure E175196 - item 6 and they
need to be installed by the Converter as shown in
figure E175196 -item 7. Therefore on these
high-specification vehicles there will only be one
remaining customer connection point available
for customer to use. See also Fuse Rating table.
The High Specification Vehicle Interface
Connector (43 way connector), see E145357, is
an order only option (A608) for production fit and
cannot be updated after the vehicle is built. The
connector is located behind the glove box as
shown in E175196. It provides access to multiple
signals, power and ground. These signals include
those required for Police /Emergency Service
conversions. The part numbers of the dedicated
harnesses are BK2V-14401-A*/D* and
BK2V-14K024-A*/D*.
A standard mating connector, with only a link wire
between cavity 36 and 39, is provide (no other
wires). A mating 43 way connector with 3m of
wiring (with all wires) is available as a kit
(KTBK2V-14A411-D*) from your local Ford dealer.
WARNING: This link wire provides a 'no
start function'. If the connection
becomes 'Open Circuit' by removing the
mating connector or link wire the vehicle
will not Crank/Start.
E145357
7
19
31
43
1
8
20
32
Date of Publication: 03/2018
FORD
TRANSIT
2016.75
4 El
ec
tric
al
209
EU
