•
Chassis frame, for example: clamp control
devices such as conical washer stacks or
machine springs with self-locking fastenings.
•
Minimum floor heights will require wheel arch
boxes to clear the rear tires.
Pedestal mounted low or drop side bodies – (not
illustrated)
For bodies or equipment not exceeding the
standard or Regular Production Order chassis
frame length.
For flat-beds and low bodies raised above the
maximum “jounced” tire position to obtain an
uninterrupted flat floor surface see vehicle data
sheets.
•
Fore and after longitudinal bracing must be
added between the rear-most 2 cross members
only
•
All chassis frame mounting holes/locations
must always be used.
•
All chassis frame mounting bracket fastenings
must have a full bolt torque with 100% friction
grip.
5.15.7 Water Tank on Camper Vehicles
NOTE:
It is recommended that a decal or label is
fitted adjacent to the filler aperture identifying the
correct fluid to be used, for example: 'Water only'
for water tanks.
FORD
TRANSIT
2016.75
Date of Publication: 03/2018
EU
5 Body and P
aint
288
