Ford TOURNEO CONNECT Owner'S Manual Download Page 304

Page: 304 / 437

wards beyond the resistance of the
catches

→

Fig. 179

Fuse table for fuses in the dash
panel

Please refer to and at the start

of the chapter on page 300.

Fig. 180

In the dash panel: fuse assignment.

The table shows the fuse locations of the
electrical equipment relevant for the driver.
The

first

column in the table contains the

location. The other columns contain the
fuse designs, the amp rating and the con-
sumer protected by the fuse.
Depending on the market and

specification

of your vehicle, the fuse numbers and loca-

tions may

differ

to those given in the table.

If necessary, ask an authorised dealer for
the exact fuse layout.
Fuse location

→

Fig. 180

30 amps, ATO

, interior lighting.

30 amps, ATO

, seat heating.

F6
F7

25 amps, ATO

, control unit for spe-

cial vehicles (depending on the

equipment).

40 amps, MAXI+

, right exterior

lighting.

40 amps, MAXI+

, central locking.

7.5 amps, MINI

, telephone.

20 amps, ATO

, Infotainment com-

ponents.

40 amps, MAXI+

left

exterior light-

ing.

40 amps, MAXI+

, blower regulator.

7.5 amps, MINI

anti-theft

alarm.

7.5 amps, MINI

, selector mecha-

nism for automatic gearbox.

10 amps, MINI

, control unit for Cli-

mate Control system or heating and
fresh air system, rear window heating

relay.

7.5 amps, MINI

, light switch (light-

ing), rain/light sensor, electric parking

brake.

7.5 amps, MINI

, display, Infotain-

ment system control panel.

20 amps, ATO

, cigarette lighter,

sockets (observe installation position
– the fuse is

factory-fitted

perma-

nent live

15 amps, ATO

, rear window wiper.

30 amps, MAXI+

, rear window

heating.

Fuse locations for vehicles with

factory-fit-

ted

towing bracket

→

Fig. 180

25 amps, ATO

, trailer control unit,

left.

15 amps, ATO

, trailer control unit.

15 amps, ATO

, trailer charging ca-

ble.

25 amps, ATO

, trailer control unit,

right.

Electric windows and electrically ad-
justable seats may be protected by

circuit breakers

which switch on again au-

tomatically a few seconds

after

the over-

load, e.g. frozen windows, has been recti-

fied.

F12

F13
F20
F30

F35

F36
F40
F42

F43

F44

F46

F52

F66
F67

F11
F29

F31

302

If and when

Summary of Contents for TOURNEO CONNECT






















































































































































































































































































































































































































































Search results

Summary of Contents for TOURNEO CONNECT

Reviews:

Ford TOURNEO CONNECT, Owner'S Manual, Page: 304 / 437

Search results

Summary of Contents for TOURNEO CONNECT

Reviews: