manualshive.com logo in svg

Ford TOURNEO CONNECT, Owner'S Manual, Page: 226 / 437

Share
Download
Ford TOURNEO CONNECT Owner'S Manual Download Page 226

— Bluetooth® is a registered trademark of

Bluetooth® SIG, Inc.

— iPod®, iPad® and iPhone® are trade-

marks of Apple Inc.

— MPEG-4 HE-AAC audio coding technolo-

gy and patents are licensed from
Fraunhofer IIS.

— SD® and SDHC® are brands or regis-

tered trademarks of SD-3C LLC in the

USA and other countries.

— Windows® is a registered trademark of

Microsoft

 Corporation, Redmond, USA.

— This product is subject to certain intellec-

tual property rights and copyrights
owned by the 

Microsoft

 Corporation. The

use or distribution of this type of technol-
ogy outside this product requires a li-
cence from 

Microsoft

 or an authorised

Microsoft

 company.

Copyright law

Audio and video 

files

 saved on data media

and audio sources are normally subject to
national and international copyright laws.
Observe legal requirements.

224

Infotainment system – General information

Summary of Contents for TOURNEO CONNECT






















































































































































































































































































































































































































































Reviews:

No comments