Ford TOURNEO CONNECT Owner'S Manual Download Page 243

Page: 243 / 437

Opening additional window with de-
tails

1. Tap the

traffic

disruption

→

page 238.

Traffic

jam.

Accident.

Ice.

Road closed.

Risk of skidding.

Danger.

Road works.

Strong winds.

Entering a destination and start-
ing route guidance

Please refer to and on page 219

and at the start of the chapter on
page 237.

Various functions for inputting destinations
are available according to the country and
equipment level.
You will

find

further information on the

symbols on the Infotainment system
screen on

→

page 240.

You can narrow down your search by add-

ing certain suggestions to the results list,
e.g. “nearby”.
The various functions for entering destina-
tions are found in the main navigation
menu.

Opening the navigation main menu

1. Tap

HOME

Opening the settings

1. Tap

HOME

Entering an address

Start route guidance by entering an ad-
dress. The navigation system suggests
known destinations while you are typing an

entry. You can also enter a new, unknown
address for route guidance.

When entering the address, enter the
name of the destination rather than

the postcode.

Selecting a destination and starting
navigation

1. Tap .
2. Enter the address of the destination

and select the desired destination.

Or:

tap and enter detailed destina-

tion information.

3. Tap

Start

Or:

tap .

Quick start

1. Tap .
2. Enter the address then tap and hold

your chosen destination for a few sec-
onds.

Enter the destination as accurately as
possible. If you make a mistake when

entering the destination, route guidance
will not be possible or you may be naviga-
ted to the wrong destination.

Suggested destinations

To suggest possible destinations, the desti-
nation overview uses stored data.

Selecting a destination and starting
navigation

1. Tap

Suggested

2. Select the required destination.

Route guidance starts automatically.

Last destinations

The navigation system stores up to 25 des-
tinations that you have driven to last in or-
der to make the most recent destinations
available for route guidance. A new desti-

Navigation

241

2KF012

720AB

Summary of Contents for TOURNEO CONNECT






















































































































































































































































































































































































































































Search results

Summary of Contents for TOURNEO CONNECT

Reviews:

Ford TOURNEO CONNECT, Owner'S Manual, Page: 243 / 437

Search results

Summary of Contents for TOURNEO CONNECT

Reviews: