Ford TOURNEO CONNECT, Owner'S Manual

Page: 29 / 437

any menus. Some warnings can be con-
firmed and hidden with the button
→
Fig. 14
1
.
Selecting a menu or information dis-
play
Vehicles with multifunction steering wheel:
1. Switch on the ignition.
2. Press the
→
Fig. 13 button, several
times if required, if a message or the ve-
hicle pictogram is displayed.
3. Press the or button to display the
menus and to browse through a menu
→ Fig. 13 .
4. To open the menu or information dis-
play shown, press the button
→
Fig. 13 or wait until the menu or infor-
mation display opens automatically af-
ter a few seconds.
Vehicles without multifunction steering
wheel:
1. Switch on the ignition.
2. Press the
→
Fig. 14
1
button,
several times if required, if a message
or the vehicle pictogram is displayed.
3. Hold down the rocker switch
→
Fig. 14
2
to display the menus
→
page 28 or to return to the menu se-
lection from a menu or an information
display.
4. To browse through the menus, press
the rocker switch
→
Fig. 14
2
up
or down.
5. To open the menu or information dis-
play shown, press the but-
ton
→
Fig. 14
1
or wait until the menu
or information display opens automati-
cally
after a few seconds.
Adjusting settings in menus
Vehicles with multifunction steering wheel:
1. Press the arrow buttons or in the
displayed menu until the desired menu
option is highlighted
→
Fig. 13 .
A frame appears around the selected
option.
2. Press the button
→
Fig. 13 to make
the required changes.
A tick indicates that the relevant
function is switched on.
Vehicles without multifunction steering
wheel:
1. In the displayed menu, press the rocker
switch
→
Fig. 14
2
at the top or
bottom until the desired menu option is
marked.
A frame appears around the selected
option.
2. Press the
button
→
Fig. 14
1
to
make the required changes.
A tick indicates that the relevant
function is switched on.
Returning to the selection menu
Vehicles with multifunction steering wheel:
1. Press the or
→
Fig. 13 button.
Vehicles without multifunction steering
wheel:
1. Select the Back menu option.
Button on the multifunction steer-
ing wheel
— To switch between the current and previ-
ous menus, press the button
→
Fig. 13 ,
→
page 25.
— Press and hold the button to show or
hide secondary displays.
If warning messages about malfunc-
tions are displayed when the ignition
is switched on, it may not be possible to
adjust some settings or display information
as described. If the fault persists, go to
a correspondingly
qualified workshop.
WARNING
If the driver is distracted when driving, this
can cause accidents and serious injuries.
·
Never operate the analogue instrument
cluster while the vehicle is in motion.
·
Always drive with your full attention
and responsibly.
Analogue instrument cluster 27
2KF012
720AB