Ford TOURNEO CONNECT Page 167 Owner'S Manual Download

Page: 167 / 437

Switching Adaptive Cruise Con-
trol on and off

Please refer to at the start of the

chapter on page 161.

Fig. 114

Left-hand

side of the multifunction

steering wheel.

Switching on

1. Press the button.

Adaptive Cruise Control is not yet con-

trolling the vehicle.

Starting control

1. Press the

button while driving for-

wards.
Adaptive Cruise Control stores the cur-
rent speed and maintains the set dis-
tance. If the current speed is outside the

defined

speed range, Adaptive Cruise

Control will set the minimum speed
when driving more slowly than the limit
or maximum speed when driving faster

than the limit.

TCS is also activated.
Depending on the driving situation and the
instrument cluster version, the following in-
dicator lamps light up:

Adaptive Cruise Control is controlling
the vehicle.

Adaptive Cruise Control is active, no
vehicle detected ahead.

Adaptive Cruise Control is active, ve-

hicle detected ahead.

Adaptive Cruise Control is active, ve-
hicle detected ahead.

The indicator lamps light up grey or do not

light up at all when Adaptive Cruise Control
is not controlling the vehicle.

Cancelling control

Briefly

press the button.

Or:

depress the brake pedal.

The indicator lamp corresponding to

the driving situation lights up, and the
speed and distance remain stored.

Control is automatically cancelled if the
Traction Control is deactivated.

Resuming control

1. Press the

button.

Adaptive Cruise Control adopts the last
stored speed and distance. The instru-
ment cluster display shows the set

speed and the indicator lamp corre-
sponding to the driving situation lights
up.

Switching off

1. Press and hold the button.

The set speed will be deleted.

Changing to the Speed Limiter

1. Press the button.
2. Select the Speed Limiter on the instru-

ment cluster display.
Adaptive Cruise Control is switched

off.

Depending on equipment, the but-

ton is either on the multifunction

steering wheel or on the turn signal lever.

Adaptive Cruise Control

165

2KF012

720AB

Summary of Contents for TOURNEO CONNECT






















































































































































































































































































































































































































































Search results

Summary of Contents for TOURNEO CONNECT

Reviews:

Related manuals for TOURNEO CONNECT

Brands by name

Popular brands

Ford TOURNEO CONNECT, Owner'S Manual

Search results

Summary of Contents for TOURNEO CONNECT

Reviews:

Related manuals for TOURNEO CONNECT

Brands by name

Popular brands