Ford TOURNEO CONNECT, Owner'S Manual, Page: 249 / 437

Pairing a mobile telephone
Prerequisites for pairing:
✓
Bluetooth is activated on the mobile
telephone.
✓
Bluetooth is activated on the Infotain-
ment system.
1. Tap
HOME
Select mobile tel-
ephone .
The system starts scanning for availa-
ble Bluetooth devices. The system
shows a list of available Bluetooth devi-
ces when the search has been comple-
ted.
2. Open the list of available Bluetooth de-
vices on the mobile telephone and se-
lect the device name of the Infotain-
ment system.
3. Observe the messages on the mobile
telephone and Infotainment system
and
confirm as necessary.
If pairing was successful, the data of
the mobile telephone will be stored in
the user
profile.
4. Optional: confirm the message for the
data transfer on the mobile telephone.
WARNING
Carrying out the pairing while driving may
cause accidents or injuries.
·
Only ever pair devices when the vehicle
is stationary.
When some mobile telephones are
paired, a PIN is shown on the display
of the mobile telephone. Enter this PIN into
the Infotainment system to complete the
pairing process.
Paired mobile telephones are stored
in the Infotainment system even if
they are not currently connected.
Managing connections
Prerequisites:
✓
The mobile telephone is paired and
connected.
✓
Bluetooth is activated on the mobile
telephone.
1. Tap
HOME
Mobile devices .
2. Tap to select the technology you wish
to use for the connection.
Active and passive connection
At least one mobile telephone must be
connected to the Infotainment system in
order to use the functions of the mobile
phone interface. If several mobile tele-
phones are connected to the Infotainment
system, you can switch between active and
passive connections. Establish an active
connection to the Infotainment system in
order to operate the mobile phone inter-
face with the desired mobile telephone.
Difference between the connection
types
Mobile telephone is paired and
connected. The functions of the mo-
bile phone interface are performed
with the data of this mobile tele-
phone.
Mobile telephone is paired and
connected. Only incoming calls can
be accepted via the mobile phone in-
terface. Other functions are not avail-
able.
Switching connection type (passive to
active)
Prerequisite:
✓
several mobile telephones are connec-
ted to the Infotainment system simul-
taneously.
1. Tap . The mobile telephone with an
active connection is highlighted.
2. Tap the name of the desired mobile tel-
ephone.
Other mobile telephones then auto-
matically have a passive connection.
User profiles
An individual user profile is automatically
created for every paired mobile telephone.
Data from the mobile telephone is stored in
the user profile, e.g. contact details or set-
tings. A maximum of 10 user profiles can be
stored in the Infotainment system simulta-
neously.
Active
Passive
Mobile phone interface 247
2KF012
720AB