Ford 2010 Mondeo Page 109 Owner'S Handbook Manual Download

Page: 109 / 304

Action

Indicator

Message

Up to three sensors have malfunctioned, an

unapproved accessory is interfering with the

system or a general malfunction has been

detected. Have the system checked by a

properly trained technician as soon as possible.

When a malfunction occurs, the system may

not be able to detect or signal low tyre pressure.

The tyre pressures are not suitable for driving

at 160 km/h (100 mph). Inflate the tyres to the

recommended pressure. See

Technical

specifications

(page 237). This message will

be displayed for only a few seconds with a low

tyre pressure warning.

amber

Inflate tyres for high

speed

You have installed wheels and tyres that do not

have sensors. The tyre pressures will not be

monitored.

Tyre sensors not

detected

All sensors have malfunctioned or an unap-

proved accessory is interfering with the system.
Have the system checked by a properly trained

technician as soon as possible.

Voice control

Action

Indicator

Message

See

Voice control

(page 255).

Voice control

Please speak

See

Voice control

(page 255).

Voice control Not

recognised

See

Voice control

(page 255).

Voice control Not

allowed

107

Information displays

Summary of Contents for 2010 Mondeo

















































































































































































































































































































Search results

Summary of Contents for 2010 Mondeo

Reviews:

Related manuals for 2010 Mondeo

Brands by name

Popular brands

Ford 2010 Mondeo, Owner'S Handbook Manual

Search results

Summary of Contents for 2010 Mondeo

Reviews:

Related manuals for 2010 Mondeo

Brands by name

Popular brands