Ford 2010 Mondeo Page 127 Owner'S Handbook Manual Download

Page: 127 / 304

HEAD RESTRAINTS

Adjusting the head restraint

WARNINGS

Raise the rear head restraint when
the rear seat is occupied by a
passenger.

When using a forward facing child
restraint on a rear seat, always
remove the head restraint from that

seat.

E71879

Adjust the head restraint so that the top
of it is level with the top of your head and
as far forwards as possible, remaining
comfortable.

Removing the head restraint

Press the locking buttons and remove the
head restraint.

REAR SEATS

WARNINGS

When folding the seatbacks down,
take care not to get your fingers
caught between the seatback and

seat frame.

Make sure that the seats and the
seatbacks are secure and fully
engaged in their catches.

Folding the seatbacks down

CAUTION

Lower the head restraints.

E86611

Press the unlock buttons down and
hold them there.

2. Push the seatback forwards.

Creating a level load floor

WARNING

Make sure the red indicator is not
showing when you engage the seat
in the catches.

125

Seats

Summary of Contents for 2010 Mondeo

















































































































































































































































































































Search results

Summary of Contents for 2010 Mondeo

Reviews:

Related manuals for 2010 Mondeo

Brands by name

Popular brands

Ford 2010 Mondeo, Owner'S Handbook Manual

Search results

Summary of Contents for 2010 Mondeo

Reviews:

Related manuals for 2010 Mondeo

Brands by name

Popular brands