Ford 2010 Mondeo Page 180 Owner'S Handbook Manual Download

Page: 180 / 304

GENERAL INFORMATION

WARNINGS

Use load securing straps to an
approved standard, e.g. DIN.

Make sure that you secure all loose
items properly.

Place luggage and other loads as
low and as far forward as possible
within the luggage or loadspace.

Do not drive with the tailgate or rear
door open. Exhaust fumes may
enter the vehicle.

Do not exceed the maximum front
and rear axle loads for your vehicle.
See

Vehicle identification

(page

242).

Heavy loads, when placed in the
passenger compartment, should be
on folded rear seats as shown. See

Rear seats

(page 125).

CAUTIONS

Do not allow items to contact the rear
windows.

Do not use any abrasive materials to
clean the interior of the rear windows.

Do not install stickers or labels to the
interior of the rear windows.

E97377

LUGGAGE ANCHOR POINTS

Estate

E86912

178

Load carrying

Summary of Contents for 2010 Mondeo

















































































































































































































































































































Search results

Summary of Contents for 2010 Mondeo

Reviews:

Related manuals for 2010 Mondeo

Brands by name

Popular brands

Ford 2010 Mondeo, Owner'S Handbook Manual

Search results

Summary of Contents for 2010 Mondeo

Reviews:

Related manuals for 2010 Mondeo

Brands by name

Popular brands