Ford 2010 Mondeo Owner'S Handbook Manual Download Page 35

Page: 35 / 304

E71313

Fitting the passenger airbag
deactivation switch

WARNING

If you need to fit a child restraint on
a seat protected by an operational
airbag in front of it, have a

passenger airbag deactivation switch
fitted. Ask your dealer for further
information.

Note:

The key switch is located in the

glove compartment with an airbag
deactivation lamp in the instrument panel.

If the airbag warning lamp illuminates or
flashes when you are driving, this indicates
a malfunction. See

Warning lamps and

indicators

(page 82). Remove the child

restraint and have the system checked
immediately.

Disabling the passenger airbag

E71312

Disabled

Enabled

Turn the switch to position

When you switch the ignition on, check
that the passenger airbag deactivation
warning lamp illuminates.

Enabling the passenger airbag

WARNING

Make sure that the passenger
airbag is enabled when you are

not

using a child restraint on the front

passenger seat.

Turn the switch to position

Occupant protection

Summary of Contents for 2010 Mondeo

















































































































































































































































































































Search results

Summary of Contents for 2010 Mondeo

Reviews:

Brands by name

Popular brands

Ford 2010 Mondeo, Owner'S Handbook Manual

Search results

Summary of Contents for 2010 Mondeo

Reviews:

Brands by name

Popular brands