Ford 2010 Mondeo Page 101 Owner'S Handbook Manual Download

Page: 101 / 304

3. Highlight

Display

and press the right

arrow button.

4. Highlight

Measure Unit

and press

the right arrow button.

5. Highlight the desired setting and press

the

button to confirm the setting.

6. Press the left arrow button to return

to exit the menu. Hold the left arrow
button pressed to return to the trip
computer display.

Type 3

Highlight

Settings

with the up and

down arrow buttons and press the
right arrow button.

2. Highlight

Setup

with the up and down

arrow buttons and press the right
arrow button.

3. Highlight

Display

and press the right

arrow button.

4. Highlight

Measure Unit

and press

the right arrow button.

5. Highlight the desired setting and press

the

button to confirm the setting.

INFORMATION MESSAGES

E70499

Press

to acknowledge and remove

some messages from the information
display. Other messages will be removed
automatically after a short time.

With instrument cluster type 3, certain
messages need to be confirmed before
you can access the menus.

Message indicator

The message indicator
illuminates to supplement some
messages. It will be red or

amber depending on the severity of the
message and will remain on until the
cause of the message has been rectified.

Message symbols

See Owner’s handbook.

Have the system checked at
the next service.

Have the system checked as
soon as possible.

Stop your vehicle as soon as it
is safe to do so.

Viewing current messages

Type 1 and 2

Press the right arrow button on the
steering wheel to enter the main
menu.

2. Highlight

Information

with the up

and down arrow buttons and press
the right arrow button.

3. Highlight

Messages

and press the

right arrow button.

4. Use the up and down buttons to view

the current messages.

Type 3

Press the right arrow button on the
steering wheel to enter the main
menu.

Information displays

Summary of Contents for 2010 Mondeo

















































































































































































































































































































Search results

Summary of Contents for 2010 Mondeo

Reviews:

Related manuals for 2010 Mondeo

Brands by name

Popular brands

Ford 2010 Mondeo, Owner'S Handbook Manual

Search results

Summary of Contents for 2010 Mondeo

Reviews:

Related manuals for 2010 Mondeo

Brands by name

Popular brands