Ford 2010 Mondeo Page 99 Owner'S Handbook Manual Download

Page: 99 / 304

2. Highlight the function to be reset.

3. Hold the

button pressed.

PERSONALISED SETTINGS

The following information is displayed in
the information display if you have
selected it:

Help screen, radio, navigation
and phone information

The help screen appears for a few
seconds when you switch the ignition on.

If the radio, navigation or telephone is
operating, information relating to this
system is displayed in the information
display.

To select which information is displayed
in the information display:

Type 1 and 2

Press the right arrow button on the
steering wheel to enter the main
menu.

2. Highlight

Setup

with the up and down

arrow buttons and press the right
arrow button.

3. Highlight

Display

and press the right

arrow button.

4. Highlight

Configure

and press the

right arrow button.

5. To toggle the

Help screen

Radio

Info

and

Phone Info

on and off,

highlight the desired setting and press
the

button to confirm the setting.

6. Press the left arrow button to exit the

menu. Hold the left arrow button
pressed to return to the trip computer
display.

Type 3

Highlight

Settings

with the up and

down arrow buttons and press the
right arrow button.

2. Highlight

Setup

with the up and down

arrow buttons and press the right
arrow button.

3. Highlight

Display

and press the right

arrow button.

4. Highlight

Configure

and press the

right arrow button.

5. To toggle the

Help screen

and

NAV

Info

on and off, highlight the desired

setting and press the

button to

confirm the setting.

Navigation information

You can also choose when the navigation
information is displayed in the information
display. Three options are available:

•

Always off

: No navigation

information is displayed in the
information display.

•

On guidance

: The navigation

information will only appear when the
navigation system provides a
guidance instruction. This function is
only available on certain navigation
systems.

•

Always on

: Navigation information

will always appear in the information
display when the navigation system is
operating.

To set when navigation information should
be displayed:

Type 1 and 2

Press the right arrow button on the
steering wheel to enter the main
menu.

2. Highlight

Setup

with the up and down

arrow buttons and press the right
arrow button.

Information displays

Summary of Contents for 2010 Mondeo

















































































































































































































































































































Search results

Summary of Contents for 2010 Mondeo

Reviews:

Related manuals for 2010 Mondeo

Brands by name

Popular brands

Ford 2010 Mondeo, Owner'S Handbook Manual

Search results

Summary of Contents for 2010 Mondeo

Reviews:

Related manuals for 2010 Mondeo

Brands by name

Popular brands