Ford 2010 Mondeo Page 130 Owner'S Handbook Manual Download

Page: 130 / 304

SUN BLINDS

Pull the blind up and attach it to the hooks
(

Side windows

E74809

Rear window

E86514

INSTRUMENT LIGHTING
DIMMER

E70723

CLOCK

Note:

Some navigation systems will

automatically set the date and time on the
clock using GPS signals.

Note:

See

General information

(page

86).

From the main menu, select the clock
function.

2. Select the option required.

3. Press

4. Using the right, left, up and down

arrow buttons, select and change the
value.

5. Press

CIGAR LIGHTER

CAUTIONS

If you use the socket when the
engine is not running, the battery
may discharge.

Do not hold the cigar lighter element
pressed in.

128

Convenience features

Summary of Contents for 2010 Mondeo

















































































































































































































































































































Search results

Summary of Contents for 2010 Mondeo

Reviews:

Related manuals for 2010 Mondeo

Brands by name

Popular brands

Ford 2010 Mondeo, Owner'S Handbook Manual

Search results

Summary of Contents for 2010 Mondeo

Reviews:

Related manuals for 2010 Mondeo

Brands by name

Popular brands